SERVICES
Laser Corrosion Removal in Sydney
BIM Remedial Sydney provides laser rust removal for steel and reinforcement in strata, commercial and industrial buildings across Greater Sydney. It is a dry, controlled way to strip corrosion back to sound metal with no blasting grit, no chemical strippers and no washdown. That means far less mess on site and less impact on the environment around your building.
Need corrosion treated in your building?
Strata managers, engineers and facilities managers across Greater Sydney can request a quote for laser corrosion removal. Send us your engineer’s report or scope and we will advise on the best approach for your building.
Call 02 9938 1740 or use the contact details below.
Where laser rust removal works best
Laser corrosion removal suits exposed steel and accessible reinforcement across strata and commercial buildings.
Reinforcement
Exposed and accessible reinforcement in concrete spalling and concrete cancer repairs. We remove the corrosion from the bar so it can be inspected, treated and protected to your engineer’s specification. Suits balconies, slabs, beams and carpark decks.
Structural steel
Beams, posts, brackets and steel framing. Suits steel that has rusted at connections, base plates and exposed faces, where the true condition of the metal needs to be seen before deciding on treatment or replacement.
Balconies
Balustrades, balcony steel and fixings. Corrosion often develops where posts and brackets meet the concrete. Removing it shows the real condition of the steel, so repair or replacement can be scoped properly.
Awnings
Steel awning frames, supports and fixings on strata and commercial buildings. Constant weather exposure causes corrosion at brackets and connections. We strip it back so the condition can be assessed before treating, coating or replacing.
Not sure whether laser removal suits your building? Send us your engineer’s report and we will advise.
Less mess. Less impact on the environment.
Laser corrosion removal is a dry process, so there is none of the grit, slurry or chemical residue that comes with blasting and stripping. Your building stays cleaner, and so do the surrounding grounds, drains and neighbouring properties.
No blasting mess
No abrasive grit or blasting media to spread, sweep up or dispose of.
No chemicals
No chemical strippers or solvents, so nothing to contain, neutralise or wash away.
No wastewater
No water or slurry running into stormwater drains, balconies or neighbouring properties.
Less waste
What comes off is the rust and surface contaminants, not a stream of spent abrasive to haul away.
BIM Remedial Sydney works under ISO 9001, 14001 and 45001 certified management systems. Laser removal still produces some fume and residue, which we manage as part of each job’s safety plan, and we test older coatings for hazardous materials before removal.
Why strata managers and engineers choose it
- Controlled removal that targets the corrosion rather than the base material
- No blasting media or chemical strippers to contain, collect or dispose of
- Cleaner work areas with far less mess, so less disruption to residents and tenants
- A prepared surface ready for inspection, treatment and protective coatings
- Delivered by the same BIM team that handles your repairs, so there is one contractor and one point of accountability
- Site inspection and scope, including testing of existing coatings where the building’s age calls for it
- Setup and area protection
- Corrosion removal to the specified standard
- Inspection, treatment and protection of the steel
- Reinstatement and handover documentation
Part of a complete repair
Laser corrosion removal is one step in a proper remedial scope. For concrete cancer and spalling, we work to your engineer’s specification: remove the corrosion, treat the steel, repair the concrete and protect the result. See our concrete spalling repairs and concrete cancer repairs.
Frequently Asked Questions
How does laser rust removal compare with sandblasting?
Blasting uses abrasive media, which creates dust, noise and waste to manage. Our approach avoids blasting media. The right method depends on the substrate, access and your engineer’s specification, and we will advise on the best fit for each job.
Will it damage the steel underneath?
The process is controlled to remove corrosion while leaving the sound substrate. We confirm the approach against your specification before work starts.
Is it suitable for occupied buildings?
Often, yes. It is a dry process with no blasting media, chemical strippers or wastewater, so there is far less mess and clean-up. We plan the work to limit disruption and tell you upfront what access and protection we need.
Can it fix concrete cancer on its own?
No. Concrete cancer needs an engineer’s assessment and a full repair scope. Corrosion removal is one stage of that.
Do you remove paint and coatings?
Where coatings need to come off, we test first for hazardous materials in older buildings and work to the results.
Is laser corrosion removal better for the environment?
It avoids blasting media, chemical strippers and wastewater, so there is less waste to haul away and nothing washed into stormwater. It still produces some fume and residue, which we manage on every job, and BIM works under an ISO 14001 certified environmental management system.
Get a Quote for Laser Corrosion Removal
Tell us about the building, the steel or reinforcement affected and any engineer’s report. We will confirm whether laser corrosion removal suits the job and provide a quote.
Call 02 9938 1740 to speak with our team.
BIM Remedial Sydney, remedial building specialists across Greater Sydney.
